I was configuring NAT onto the following interface (router Cisco 881)
ip address negotiated
ip mtu 1492
dialer pool 1
but everytime i enter the "ip nat outside", the dialer0 no longer pingable. Anything missed? Seems that i only have this difficulties on PPPoA, but PPPoE works fine. I have tried all kind of NAT (static NAT, overload), and weren't working.
Hi, I have different questions about tunnels management. 1) Imagine that you have 2 router (A,B) with a GRE Tunnel, but inside you have also 2 different routers o firewall with a vpn connection (image1 attached). Which would be the n...
Hello!I make syslogcollector + RESTAPI for collect syslog messages.It have next iterested features:1. Can recognise header from Cisco/Moxa and more devices and write it in dedicated field2. Have API for integrated with other tools3. Work with Mongodb4. We...
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...