09-21-2018 01:08 PM
Hello, anyone can you please help to configure my router for configure Internet line
my ip details
Ip pool 14.98.129.148/29
ip gateway 14.98.129.249
lan ip 14.98.129.251-254
subnet 255.255.255.248
wan ip 111.93.94.140/30
wan gateway 111.93.94.141
wan usable ip 111.93.94.142
subnet 255.255.255.252
09-21-2018 01:12 PM
Cisco docwiki have sample example for your kind of setup.
http://docwiki.cisco.com/wiki/NAT_failover_with_DUAL_ISP_on_a_router_Configuration_Example
change the interface and IP addresses, you it should work basic setup.
09-21-2018 01:41 PM - edited 09-21-2018 01:46 PM
Hello
@kuldip.trivedi wrote:
Hello, anyone can you please help to configure my router for configure Internet line
my ip details
Ip pool 14.98.129.148/29
ip gateway 14.98.129.249
lan ip 14.98.129.251-254
subnet 255.255.255.248
The Ip gateway of the ip pool is incorrect should be between 14.98.129.145-150
Also is the lan ip subnet so for them to be in the same network change the subnet mask to be a /25 = 255.255.255.128
09-21-2018 01:44 PM
Hello,
it looks like you got public IP address ranges for both LAN and WAN, is that right ? If that is the case, the config should look like below:
Building configuration...
Current configuration : 723 bytes
!
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname C1905
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
!
no ipv6 cef
ip source-route
ip cef
!
multilink bundle-name authenticated
!
archive
log config
hidekeys
!
interface GigabitEthernet0/0
description LAN Interface
ip address 14.98.129.249 255.255.255.248
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/2
description WAN Interface
ip address 111.93.94.142 255.255.255.252
duplex auto
speed auto
!
ip forward-protocol nd
!
ip route 0.0.0.0 0.0.0.0 111.93.94.141
!
no ip http server
!
control-plane
!
line con 0
line aux 0
line vty 0 3
login
!
exception data-corruption buffer truncate
scheduler allocate 20000 1000
end
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide