Need Stencil for 2960-L

[jws1986]

We are in the middle of a network refresh for our business. I was going to update our existing topology's for our new switches. We have several models of the 2960 line, however after downloading the stencils for 2960 I do not see the specific models we need. Could you please direct me to where I can download these, or how I can get them created? Attached is a picture of the front of this model. The color is different than other models. Any help would be appreciated. Thank you!

WS-C2960L-24PS-LL
WS-C2960L-48PS-LL

[jws1986]

Are these boards active? I was told by your TAC team this is how to request new stencils. If this is not the correct way could someone please advise?

[jws1986]

Is there anyone that can assist with this?

[Ratheesh Kumar]

Pls see if that helps

Hope this Helps

Cheers
Rath!
***Please rate helpful posts***

[jws1986]

---

@Ratheesh Kumar wrote:

Pls see if that helps

Hope this Helps

Cheers
Rath!
***Please rate helpful posts***

Yes Rash, thank you so much! This is perfect. Do you happen to have one for the 48 port as well?

---

[jws1986]

Is it possible to get one for the same switch only a 48 port? It would help me out tremendously. Thank you,

[WilliamHoard5648]

Can you tell me where I can get a Stencil for a WS-2960L-8TS-LL. I do not see them in the 2960L Stencil file on Cisco download site. The only 2960L stencil in that file is the rear of a 19" rack mount switch and the one I have is only 11 inches wide. 

[ph404]

May not be needed, but since I had to do a re-design and there were alot of this type, I made a quick effort from scratch for my purposes, I am no expert, but I will add to the cause.

If people don't want the rack ears, just ungroup once, delete the background.

I named them simploy 8, 16, 24, 48 TS and PS (POE) include some back versions for normal and compact form factor

They are I think to scale-ish, I used mm sorry about that, one issue I think there is the text at the far right doesnt shrink properly, but I don7t know how to fix that. maybe someone than me can, as I said, I made them for my purposes.