04-15-2019 03:59 PM
Hi Everyone,
We have below setup where Switches 1 and 3 are running VRRP between them.
They are not cisco switches.
Both the switches have OSPF nei to the core routers.
Problem is that if core Router 1 is down then some users can not access the Internet as Sw1 has no route for inside users.
IS there any way if i can create the OSPF nei between Sw1 and 3 so that if Sw1 lose the connection to Core Router 1 it can have ospf routes learned from the Sw3?
Best Regards
MAhesh
Solved! Go to Solution.
04-15-2019 04:55 PM
It is hard to speak for another vendor - but if it was Cisco switches you could.
04-15-2019 04:55 PM
It is hard to speak for another vendor - but if it was Cisco switches you could.
04-15-2019 05:18 PM
Currently switch 1 and 3 both are advertising the ospf routes to the core devices.
IF i run the point to point OSPF between the two switches with lower cost then they will learn the below routes from ospf
routes from core router
will they learn static routes in new ospf neiship which they advertise to ospf?
04-17-2019 07:17 PM
yes i was able to do that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide