No show DMVPN

[livi9003]

I have DMVPN working on 7 routers all are 4331 with 16.9.5. I am using NHRP but not crytop

All is working well, But when I try to "Show DMVPN"  I get invalid input after the d

I ideas?

Again DMVPN is work with a dynamic tunnel spoke to spoke when needed, just no sh dmvpm.

Thank you

[Georg Pauwen]

Hello,

do you see anything with:

show ip nhrp nhs

[livi9003]

nhrp Registration Timer: 20 Sec

[Deepak Kumar]

Hi,

What is the output you are getting? Can u post here?

I think you will get something like:

Router# show dmvpn
Legend: Attrb --> S - Static, D - Dynamic, I - Incomplete
        N - NATed, L - Local, X - No Socket
        # Ent --> Number of NHRP entries with same NBMA peer
! The line below indicates that the sessions are being displayed for Tunnel1. 
! Tunnel1 is acting as a spoke and is a peer with three other NBMA peers.
Tunnel1, Type: Spoke, NBMA Peers: 3,
 # Ent  Peer NBMA Addr Peer Tunnel Add State  UpDn Tm Attrb
 ----- --------------- --------------- ----- -------- -----
     2      192.0.x.x     192.0.2.116   IKE     3w0d D    
     1     192.0.x.x      192.0.2.11  NHRP 02:40:51 S    
     1     192.0.x.x      192.0.2.10    UP     3w0d S    
Tunnel2, Type: Spoke, NBMA Peers: 1, 
 # Ent  Peer NBMA Addr Peer Tunnel Add State  UpDn Tm Attrb
 ----- --------------- --------------- ----- -------- -----
     1        192.0.x.x      192.0.2.171   IKE    never S 

[livi9003]

I got  get invalid input after the d

#sh dmvpn

      ^

"invalid input detected at '^'

[Deepak Kumar]

Hi,

What about the license? You might need a Security license.

[pboynton1]

did you ever get this sorted????  I am having the exact same issue under similar circumstances

[paul driver]

Hello @pboynton1 
Suggest create your own post so it can be troubleshooted , appending the outpout of show version to it

[Georg Pauwen]

Hello,

try and toggle 'ip cef':

4331(config)#no ip cef

4331(config)#ip cef

[Kagamigawa]

like Deepak Kumar said , you need check your license ,  DMVPN on IOS-XE based router need Security license or higher