Currently I have an 8 ports IMA module which running on 4 active T1 plugged into the IMA module. They are going to discontinue 3 T1 services and keep
only 1 single T1.
Can I use the existing 8 ports IMA module for a single T1 atm connection? Would it work?
My config would be something like this:
interface ATM1/0.1 point-to-point
ip address x.x.x.1 255.255.255.128
no shutdown
no atm ilmi-keepalive
no scrambling-payload
pvc 2/35
protocol ip x.x.x.2 broadcast
encapsulation aal5snap
!
Much appreciated for any help here.