You are right, I didn't upgraded it has I tought.
now should be ok, but how do I configure OSP?
ITC0004#sh ver
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I5S-M), Version 12
.2(25)EWA12, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 15-Nov-07 18:21 by kellythw
Image text-base: 0x10000000, data-base: 0x114BC884
ROM: 12.2(31r)SG3
Pod Revision 14, Force Revision 34, Tie Revision 32
ITC0004 uptime is 8 hours, 43 minutes
Uptime for this control processor is 7 hours, 54 minutes
System returned to ROM by redundancy reset
System restarted at 12:58:09 cet Sat Dec 8 2007
System image file is "bootflash:cat4000-i5s-mz.122-25.EWA12.bin"
cisco WS-C4510R (MPC8540) processor (revision 11) with 524288K bytes of memory.
Processor board ID FOX11140THS
MPC8540 CPU at 800Mhz, Supervisor V-10GE
Last reset from Redundancy Reset
15 Virtual Ethernet interfaces
296 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
ITC0004#
