03-27-2014 08:52 PM - edited 03-04-2019 10:40 PM
Could you please provide insight on how to restrict specific routes learned via OSPF from getting updated in the main routing table.
03-28-2014 12:40 PM
It kinda depends on what type of routes you are trying to filter. What are you trying to accomplish?
03-30-2014 07:48 PM
I am looking for filtering LSAs from getting updated in the main routing table.
03-31-2014 01:13 AM
Hi,
if you don't want LSAs to make it in the RIB then you can use distribute-list in command but don't forget it will only be local on the router where this command is applied because LSAs will still be flooded to other routers in the area.
Could you be more precise about what you are trying to achieve with a topology and explanation.
Regards
Alain
03-31-2014 04:13 AM
Hi,
Alain is right but remember that LSA-3 can be filtered on ABR. This way routes are not put in routing table and also not advertised in one area.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide