What is got from u
Two ISP u have
and you want to spilit traffice to ASA1 and ASA2.
If this is the case
in 3560 U have to do PBR.
ACLA (For Routing Traffic Towards ASA1)
Permit ip 192.168.x.10 any
ACLB (For Routing Traffice Towards ASA2)
permit ip 192.168.x.20 any
Create Router map
Router-map RM-AB permit 10
match ip address ACLA
set ip next hop (ASA1 interface IP)
Router-map RM-AB permit 20
match ip address ACLb
set ip next hop (ASA2 Interface IP)
Apply Route map to vlan
int vlan x
ip policy route-map RM-AB
*** Do Rate Helpful Posts***
Jawad