12-23-2010 09:16 PM - edited 03-04-2019 10:53 AM
Hi,
I have configured PBR on my 1800 series router, it is working perfect. Now I am changing my router from 1800 to 2901 router with the same config, so the PBR stop working and I am not getting hits in the second WAN interface. The config is quite simple, Kindly help:
Configuration:
===========
interface FastEthernet0/0
description INTERNET # 2
ip address 203.xx.x.xx 255.255.255.248
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 172.16.1.1 255.255.255.240
ip nat inside
ip virtual-reassembly
ip policy route-map zee
duplex auto
speed auto
!
interface Serial0/0/0:0
description INTERNET #1 Internet
ip address 221.xx.xx.xx 255.255.255.252
ip nat outside
ip virtual-reassembly
!
!
!
!
!
!
!
12-24-2010 09:14 AM
Which exact IOS are you using ?
12-24-2010 03:00 PM
Hi Shaikh,
I have checked the configuration and it looks correct and can you please send the output of show route-map zee ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide