Checking for thoughts on which would be the best configuration for port channels for the uplink interfaces on our usc to our catalyst 9300 switches.
Option A - Create a 2 port channels on the switches with members TenG 1/1/1 and TenG 2/1/1 for Port Channel 1 and TenG 1/1/2 and 2/1/2 for Port Channel 2
Connect FI-A
FI-A Eth 1/1 to TenG 1/1/1
FI-A Eth 1/2 to TenG 2/1/1
Connect FI-B
FI-B Eth 1/1 to TenG 1/1/2
FI-B Eth 1/2 to TenG 2/1/2
or
Option B - Using the same port channels on the switches:
FI-A Eth 1/1 to TenG 1/1/1
FI-B Eth 1/1 to TenG 2/1/1
and
FI-A Eth 1/2 to TenG 1/1/2
FI-B Eth 1/2 to TenG 2/1/2
Thanks for your input
