Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hi All experts, I am trying to understand a difference between E1 and E2 routes in the OSPF. Please help me to get in technical deep in this topic.   Regards, Deepak Kumar

Resolved! ospf adjacency

Dear all ,please what is the correct answer of the below questionhow to prevent OS PF adjacency issues can occur by mismatch interface type ?1- enable MTU ignore feature2- configure the environment as point -to-point network3- enable capability-trans...

engreda22 by Level 1
  • 1070 Views
  • 5 replies
  • 0 Helpful votes

Hello All,    I've recently purchased a few 1841 routers for a home lab while I study for my CCNA.  The routers were purchased off of eBay, and all of them were locked and requiring login before getting to a command line.   I was hoping it would be a...

Samc2527 by Level 1
  • 1342 Views
  • 7 replies
  • 0 Helpful votes

I have a 100MB Charter WAN connection between two locations.  We are plugged directly into the Cisco Equipment provided by Charter.  One location has a 1921 Cisco Router and the other location has a 2921 Cisco Router.   I have been using iperf to con...

User750 by Level 1
  • 1371 Views
  • 3 replies
  • 0 Helpful votes

Hi.   I have a router running IOS-XE terminating a 300Mbps transatlantic WAN link. I have written the following policy to be applied to the outgoing interface facing the WAN:   policy-map 300MBPS-SHAPER class class-default  shape average 300000000   ...

I need to add a few static route to an MPLS router running BGP, and I would like these static routes be advertised to the rest of the MPLS NetworkThe current BGP configs are as follows: router bgp 64444 no synchronization bgp router-id 10.0.3.1 bgp l...

msv by Level 1
  • 26599 Views
  • 13 replies
  • 0 Helpful votes

Hello,    Can someone explain to me what does mean the following commands please :    mls qos map cos-dscp 0 8 16 24 32 46 48 56mls qos srr-queue output cos-map queue 1 threshold 3 5mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7mls qos sr...

Resolved! OSPF and VLANs

Scope of Inquiry:I've supported heterogeneous networks for merely a decade, but never quite big enough to expose me to Enterprise routing/switching concepts in real-time. I've supported numerous Metro Ethernet hub and spoke topologies, as well as a f...

worldnews7 by Level 1
  • 33508 Views
  • 12 replies
  • 0 Helpful votes

Currently we have a 2901 router that connects to our ISP and have a 100/100 circuit. We will be upgrading to a 1Gb circuit here shortly and will need to replace the router so we can have 3 ethernet ports ( I know we can buy a card for the 2901 but a ...

jkay18041 by Level 3
  • 849 Views
  • 2 replies
  • 0 Helpful votes

Very interesting behaviour :   show license: Index 1 Feature: advancedmetroipaccess Period left: Not Activated License Type: Evaluation License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: NoneIndex 2 Feat...

hans.goes by Level 1
  • 2836 Views
  • 3 replies
  • 0 Helpful votes

Hi, We used to have a RV016 and we repalced it recently with a RV325. The same setup used to work fine on the RV016, but can't seem to make it work the same way on the new router. We have 2 machines (a NAS and a DVR) with port forwarding setup. I can...

AlexSST by Level 1
  • 759 Views
  • 1 replies
  • 0 Helpful votes