Port forwarding to server inside NAT with ip sla applied
I have router with two ISP attached to different interfaces.
In order to provide high availability of the Inernet connection, I configures SLA for both connecitons. In same time, both external interfaces are used for NAT.
Now, I need to perform port forwarding from Internet to some servers inside LAN. Before applying SLA it was quite simple - ip nat inside source static tcp $localIP $localPort $externalIP $externalPort . Unfortunately, it doesn't work when IP SLA is applied.
The question is - how to correctly aply port forwarding with IP SLA configured?
Listen: https://smarturl.it/CCRS9E25 Follow us: twitter.com/ciscochampions
With applications and users everywhere, the networks are now, more than ever, being tasked with delivering consistent protection while providing an exceptional user exper...
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.