04-07-2013 06:23 AM - edited 03-04-2019 07:31 PM
Dear all,
I have router with two ISP attached to different interfaces.
In order to provide high availability of the Inernet connection, I configures SLA for both connecitons. In same time, both external interfaces are used for NAT.
Now, I need to perform port forwarding from Internet to some servers inside LAN. Before applying SLA it was quite simple - ip nat inside source static tcp $localIP $localPort $externalIP $externalPort . Unfortunately, it doesn't work when IP SLA is applied.
The question is - how to correctly aply port forwarding with IP SLA configured?
Thank you in advance for any help.
Regards
Piotr
04-07-2013 10:26 AM
Hi,
use the keyword extended with 2 static PAT entries.
Regards
Alain
Don't forget to rate helpful posts.
04-07-2013 11:28 AM
@Cadet
Could you give me an example of command you mentioned? Thank you in advance.
04-07-2013 11:48 PM
I figured out that port forwarding with approach, which I presented in the first post, works correcly. However, I need to change external IP address.
Unfortunately some ports needs to be availalble only on first public IP. How to achieve such configuration? By adding static routes? This will cause, that IP SLA will be useless imho...
I am confused now...
Thank you in advance for any help.
04-08-2013 04:13 AM
It looks like this is more complex issue than I thought. I think this issue can be treated as closed - I am moving it to
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide