cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
604
Views
0
Helpful
2
Replies
Highlighted
Beginner

Port-security on Cisco CISCO891-K9

Hello 

is it possible to configure ports on  CISCO891-K9 for port-security? 
i need to use mac address port-security on few switch ports but "switchport port-security" command is not available. 

I am running following:


Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.4(3)M3, RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1)

ROUTER-NAME uptime is 12 weeks, 5 days, 5 hours, 29 minutes
System returned to ROM by power-on
System restarted at 08:23:38 pst Thu Nov 9 2017
System image file is "flash:c890-universalk9-mz.154-3.M3.bin"
Last reload type: Normal Reload
Last reload reason: power-on

\

9 FastEthernet interfaces
1 Gigabit Ethernet interface
1 Serial interface
1 terminal line
1 Virtual Private Network (VPN) Module
256K bytes of non-volatile configuration memory.
247464K bytes of ATA CompactFlash (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device# PID SN
-------------------------------------------------
*1 CISCO891-K9

 

 

Apprecaite responses.

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advisor

Re: Port-security on Cisco CISCO891-K9

The 880 series of routers do not support port security or mac address filtering.

View solution in original post

2 REPLIES 2
Highlighted
Advisor

Re: Port-security on Cisco CISCO891-K9

The 880 series of routers do not support port security or mac address filtering.

View solution in original post

Beginner

Re: Port-security on Cisco CISCO891-K9

Great thanks