02-26-2018 06:25 AM - edited 03-05-2019 09:59 AM
We just replaced our core and are having an issue with our VDI environment.
The ip range for these devices is:
10.240.0.100 - 10.240.5.254
Subnet: 255.255.240.0
If a VDI device boots up and pulls one of the 10.240.0.x addresses it connects and works fine. But if it pulls anything from 10.240.1.x-10.240.5.x it wont boot. Routing and netmask appears correct, just curious if anyone had any suggestions on what to look for.
02-26-2018 08:39 AM
Hello,
routing in what context, what does the network look like ? Which default gateway is assigned to the devices ?
02-27-2018 08:27 AM
We ended up finding the issue. Turns out the PVS servers had a 255 netmask instead of 240. How they ever worked in the past, I have no idea. Should have never worked.
Thanks for the reply anyways, Georg.
02-27-2018 08:49 AM
Good stuff, glad you have got it resolved...
03-01-2018 03:32 AM
Possibly proxy ARP was enabled somewhere in the past "fixing" the wrong mask issue?
BR,
Milan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide