pri-group command not available

[atosorigin]

Hi,

I would like to know why the pri-group command is not available under the controller xx submenu of my 2600XM router. It is running the following IOS c2600-advipservicesk9-mz.123-26.bin and have a VWIC-1MFT-G703 card.

Thanks a lot for your help.

[paolo bevilacqua]

Hi, for data only pri on the vwic, you can try with an non-voice image, else the recommended card is nm-xce1/t1.

[atosorigin]

I tried first with a ipbase image but I've got the same result. Moreover the pri-group command is available with the same card on 1841 platform.

[paolo bevilacqua]

The 1841 is very different. On the 2600 the only way to have data pri is the nm mentioned, or a the vwic in a nm-hdv with codecs.