what happens if one channel on a PRI is set to maintenance.
i ran a debug on one of my cisco voice gateway terminated 4 pris and users were experiencing fast busy when trying to call outbound....
Channel ID i = 0xE9808397
Exclusive, Interface 0, Channel 23
1019249: Oct 17 09:03:00 PDT: ISDN Se4/0:23 Q931: RX <- RELEASE_COMP pd = 8 cal
lref = 0x8C4A
Cause i = 0x83B6 - Incoming calls are barred
1019250: Oct 17 09:03:00 PDT: ISDN Se4/0:23 Q931: RX <- SERVICE pd = 3 callref
= 0x00
Change Status i = 0xC1 - maintenance
Channel ID i = 0xE9808397
Theseare the supported state values:
0--In service
1--Maintenance
2--Out of service
