I am trying to comprehend the following output of the show queueing interface command. It seems to be indicating matches on the high queue even though the high queue is not configured. Also, there are no matches indicated on the medium queue but matching traffic is present.
Lab-831#show queueing p
Current DLCI priority queue configuration:
Current priority queue configuration:
List Queue Args
1 low default
1 medium protocol ip list 111
Lab-831#show queueing int e1
Interface Ethernet1 queueing strategy: priority
Output queue utilization (queue/count)
high/14 medium/0 normal/0 low/16
Lab-831#show access-l 111
Extended IP access list 111
10 permit ip any any dscp af31
Lab-831#show access-l test
Extended IP access list test
30 permit ip any any dscp af31 (9 matches)
40 permit ip any any (11 matches)
Lab-831#show vers
Cisco IOS Software, C831 Software (C831-K9O3SY6-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 18-Aug-10 13:45 by prod_rel_team
ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
Lab-831 uptime is 3 minutes
System returned to ROM by reload at 14:58:10 EDT Tue Oct 4 2011
System restarted at 15:00:04 EDT Tue Oct 4 2011
System image file is "flash:c831-k9o3sy6-mz.124-25d.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco C831 (MPC857DSL) processor (revision 0x500) with 58983K/6553K bytes of memory.
Processor board ID FHK095251Y3, with hardware revision 401D
CPU rev number 7
3 Ethernet interfaces
4 FastEthernet interfaces
128K bytes of NVRAM.
12288K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)
Configuration register is 0x2102
Lab-831#
