cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1532
Views
0
Helpful
9
Replies

problem RSP1 ASR 903

Dhikra Marghli
Level 5
Level 5

Hello

 

I have ASR 903 and i want to copy "asr900rsp2-universalk9_npe.16.09.04.SPA.bin"  from USB to bootflashRSP1 ( backup )  But i have a error :

 

Router#copy usb0: flash:
Error: Licensing infrastructure is NOT initialized.

Source filename [asr900rsp2-universalk9_npe.16.09.04.SPA.bin]?
Destination filename [asr900rsp2-universalk9_npe.16.09.04.SPA.bin]?
%Error opening bootflash:/asr900rsp2-universalk9_npe.16.09.04.SPA.bin (Permission denied)

 

 

what is the problem for RSP 1 ( stanby )  and what is the solution 

 

i wait from ecpert ASR 900 help me and i wait a reply

 

thanks

9 Replies 9

Dhikra Marghli
Level 5
Level 5

The problem RSP 1  for ASR 903 ( stanby )

 

Router#dir flash:
Error: Licensing infrastructure is NOT initialized.

Directory of bootflash:/

22 drwx 4096 May 23 2019 01:48:29 +00:00 lost+found
75523 drwx 4096 May 23 2019 01:50:24 +00:00 .installer
135939 drwx 4096 Dec 2 2020 10:05:33 +00:00 core
75525 drwx 4096 Dec 2 2020 10:05:19 +00:00 .prst_sync
60418 drwx 4096 Dec 2 2020 10:07:11 +00:00 tracelogs
30212 drwx 4096 Dec 2 2020 10:05:34 +00:00 .rollback_timer
15108 drwx 4096 Dec 2 2020 10:06:57 +00:00 .dbpersist

 

/////////////////////////////////////////////////////////////////////////

 

Router#copy usb0: bootflash:
Error: Licensing infrastructure is NOT initialized.

Source filename [asr900rsp2-universalk9_npe.16.09.04.SPA.bin]?
Destination filename [asr900rsp2-universalk9_npe.16.09.04.SPA.bin]?
%Error opening bootflash:/asr900rsp2-universalk9_npe.16.09.04.SPA.bin (Permission denied)

 

///////////////////////////////////////////////////

 

so what is solution of RSP1 ?,

balaji.bandi
Hall of Fame
Hall of Fame

Not sure what exactly you trying to do here ? are you in the process of upgrade ?

 

RSP1  is standby ? is this correct ?

 

i also see some messages here ?

Error: Licensing infrastructure is NOT initialized.

clear platform license-partition and reload the module. ( if this is live environment do in the maintenance window ?)

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

YES  , it is RSP 1 for ASR 903 

 

1 step :      rommon> copy usb0: asr900rsp2-universalk9_npe.16.09.04.SPA.bin

2 step :    boot usb0 :

3step : 

Router#copy usb0: bootflash:
Error: Licensing infrastructure is NOT initialized.

Source filename [asr900rsp2-universalk9_npe.16.09.04.SPA.bin]?
Destination filename [asr900rsp2-universalk9_npe.16.09.04.SPA.bin]?
%Error opening bootflash:/asr900rsp2-universalk9_npe.16.09.04.SPA.bin (Permission denied)

 

so  that are steps in RSP 1 ( stanby ).

 

Just  want to knwo what is the command that allow me ?? :  clear platform license-partition and reload the module. (  that you tell me ) ??? !!!!! to resolve this error

 

thanks in advance 

clear platform license-partition and reload the module. ( if this is live environment do in the maintenance window ?)

 

what is the command that resolve this error !!! 

 

thanks in advance

the command does not exit : clear platform license-partition !!!!  this command does not exsit in ASR 903  cisco

 

 

#clear platform 

 

condition      Clear conditional debug and packet-trace configuration and data
hardware     Clear platform hardware information
l2lisp        platform l2lisp
software

 

 

how i can rsolve this problem and what is the command exct for ASR 903 !!??

 

i wait a reply from expert ASR 900 ??

 

thansk 

please i need a help and i wait a answer !!

 

thanks


@Dhikra Marghli wrote:

YES  , it is RSP 1 for ASR 903 

1 step :      rommon> copy usb0: asr900rsp2-universalk9_npe.16.09.04.SPA.bin


If this is an RSP1 then why are you copying the firmware for an RSP2?  

Under the Restrictions for Upgrading from Cisco IOS XE Release 3.x to Cisco IOS XE Release 16.x, it specifically states: 

 

RSP1 Module is not supported in Cisco IOS XE Releases 16.x.

Yes  it was rsp standby with rsp active but now it is not rsp standby because .we plug this  rsp standby from asr 903 because it have a problem and we try installed only in asr 903 ..so it became active ....!!

 

So we try copy ios from USB 0 to bootflash  for this rsp as same work rsp0 active . It show message error as mentioned before !!! 

 

So what's command resolve message error .

So i wait the help from you and reply ..

Thanks 

the problem is not resolved !!!

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco