Problem with Local Connected Route

[viperthehero]

Hello, i have a problem with my cisco ASR9K

RP/0/RSP1/CPU0:PE-XX#sh run int GigabitEthernet0/0/0/0.3838

Tue Feb 11 18:43:01.345 GMT

interface GigabitEthernet0/0/0/0.3838

description XX

bandwidth 128

service-policy input rate_limit_128k

service-policy output Package2-128k-parent

vrf cc

ipv4 address 10.111.21.1 255.255.255.0

encapsulation dot1q 3838

!

RP/0/RSP1/CPU0:PE-XX#show arp vrf cc GigabitEthernet0/0/0/0.3838

Tue Feb 11 18:43:06.763 GMT

-------------------------------------------------------------------------------

0/0/CPU0

-------------------------------------------------------------------------------

Address         Age        Hardware Addr   State      Type  Interface

10.111.21.1     -          4055.391f.6134  Interface  ARPA  GigabitEthernet0/0/0/0.3838

10.111.21.2     00:00:17   0025.64a6.a08e  Dynamic    ARPA  GigabitEthernet0/0/0/0.3838

10.111.21.10    00:13:49   0025.64a6.a08e  Dynamic    ARPA  GigabitEthernet0/0/0/0.3838

RP/0/RSP1/CPU0:PE-XX#show route vrf cc | i 3838

Tue Feb 11 18:43:14.780 GMT

i have configured properly this sub interface of my router, if i show the arp it detected, but why if i show route, there is no connected local route detected from my sub interface

i'm sorry if my english bad

thx a lot.

[cadet alain]

Hi,

Maybe a stupid question but did you do sh ip route vrf cc ?

Regards

Alain

Don't forget to rate helpful posts.

[viperthehero]

There is so many local, static, and connected route

RP/0/RSP1/CPU0:PE-D4-GBL-VPN#show route vrf cc | i Gig   

Wed Feb 12 04:58:50.944 GMT

S    10.111.11.0/24 [1/0] via 172.31.100.222, 02:50:55, GigabitEthernet0/0/0/11.3821

S    10.111.141.0/24 [1/0] via 172.16.0.42, 02:50:55, GigabitEthernet0/0/0/0.2785

C    172.16.0.0/30 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2837

L    172.16.0.1/32 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2837

C    172.16.0.4/30 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2805

L    172.16.0.5/32 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2805

C    172.16.0.8/30 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2802

L    172.16.0.9/32 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2802

C    172.16.0.12/30 is directly connected, 02:50:55, GigabitEthernet0/0/0/11.2126

L    172.16.0.13/32 is directly connected, 02:50:55, GigabitEthernet0/0/0/11.2126

C    172.16.0.32/30 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2849

L    172.16.0.33/32 is directly connected, 02:50:55, GigabitEthernet0/0/0/0.2849

RP/0/RSP1/CPU0:PE-D4-GBL-VPN#show ipv4 vrf cc interface GigabitEthernet0/0/0/0.3838 brief

Wed Feb 12 05:04:17.971 GMT

Interface                      IP-Address      Status                Protocol

GigabitEthernet0/0/0/0.3838    10.111.21.1     Up                    Up 

RP/0/RSP1/CPU0:PE-D4-GBL-VPN#show ip route vrf cc | i 3838

Wed Feb 12 05:00:10.415 GMT

RP/0/RSP1/CPU0:PE-D4-GBL-VPN#

but none of vlan 3838 is detected as local and connected in this PE

is that a bug ? or maybe the subinterface in my asr is full

this is the capture of total circuit in my PE

RP/0/RSP1/CPU0:PE-XX#show interfaces summary

Wed Feb 12 05:14:21.244 GMT

Interface Type          Total    UP       Down     Admin Down

--------------          -----    --       ----     ----------

ALL TYPES               2240     1872     2        366    

--------------        

IFT_GETHERNET           40       11       0        29     

IFT_VLAN_SUBIF          2182     1856     0        326    

IFT_LOOPBACK            1        1        0        0      

IFT_ETHERNET            4        0        1        3      

IFT_NULL                1        1        0        0      

IFT_TENGETHERNET        12       3        1        8      

sry if my question is stupid, i desperately want to troubleshoot this problem in my workplace

thx for the help