cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
263
Views
0
Helpful
2
Replies

QoS Drop with Available

cassio.gomes
Level 1
Level 1

Hi...

I have a QOS configuration on cisco router 2600:

-------------------------------------

class-map match-any CLASS_MULTIMIDIA

match dscp ef

match access-group named MTM

!

policy-map QOS_MPLS

class CLASS_MULTIMIDIA

priority 644

set ip dscp ef

class class-default

fair-queue

---------------------------------------

I have two PCs, first one, is sending packets already marked with DSCP EF, and the second isn´t. Then I did a ACL to mark packets from second PC.

When the only second PC start the traffic, with 256K, the policy in output serial interface is dropping average 3K, and I have bandwidth available.

When first PC start traffic don’t have problems

PCs are in same LAN.

WHY?

2 Replies 2

Hello,

what is your named access-list MTM matching on ? Can you post the entire configuration of your router ?

Regards,

GP

ACL

ip access-list extended MTM

permit ip host 10.232.1.1 10.232.0.0 0.0.255.255

This QoS configurations is to ConferenceVideo.

Thanks

CLRGomes

Review Cisco Networking for a $25 gift card