02-15-2011 02:52 PM - edited 03-04-2019 11:26 AM
Hello, I'm trying to set up QoS between a 2811 router and a 3750g switch. I'm currently using the 3750 as the router for one side, having the interface connecting to the router as a routed interface. I could use a little help in trying to figure something out, though.
I have this config on the router side:
class-map match-any IPTel-Traffic-CL
match ip dscp ef
match ip precedence 5
class-map match-any IPTel-Signalling-CL
match ip dscp cs5
match ip precedence 4
match ip precedence 3
!
!
policy-map MPLS-OUT-QOS
class IPTel-Traffic-CL
class IPTel-Signalling-CL
priority percent 5
02-15-2011 10:00 PM
Hi,
This link should answer to your question:
QoS on switch (HW based) is very different compare to QoS on Router (SW based)
HTH
Laurent.
02-16-2011 01:20 PM
Thank you for that link. Apparently my Cisco login doesn't have enough permissions to access that link you provided. Would you mind posting the information out of that here, or get it to me another way? I'm interested in what it has to say.
Thanks!
02-16-2011 01:24 PM
Sorry for that. Try this one which doesn’t require any login: http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_50_se/configuration/guide/swqos.html
02-16-2011 01:24 PM
Hi,
just get rid of the partner part in url and you'll get to it without problem.
Regards.
alain.
02-16-2011 01:28 PM
Thanks. This one works and I'm looking though it now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide