"channel-group 0 unframed" unsupport !

[syjeon]

We procurred new cisco router with module 'VWIC2-2MFT-T1/E1'. Btw, we've found one command does not support like following.

XXX003(config)#controller E1 0/2/1
XXX003(config-controller)#channel-group 0 unframed
                                                             ^

XXX003(config-controller)#channel-group 0 ?

  timeslots  List of timeslots in the channel group

!

reconized there is no such of 'unframed' command under controller E1.

but, Old router can assign this configuration without any issue. Old router is having module 'VWIC-2MFT-G703'

Can anyone explain what is the alternative command? which new command can be in instead?

Thanks you.

[lin binbin]

hi syjeon
     It seems like your sofrware on your new router maynot support this command. I suggest you to upgrade your router with the same software on your old one . Hope this can help you.

     ps, i don't know any other alternative command,sorry for that~

[paolo bevilacqua]

Already replied at

https://supportforums.cisco.com/message/3810939

Please avoid posting duplicates.

[syjeon]

Hi Paolo,

You didn't reply my final queiry. I've proposed sample configuration but coudn't find your reply. but still doubt.

can you check the pre-post article and see my query?