03-22-2021 08:32 AM
Might someone be able to help explain the difference between the following global configuration mode "domain" commands their effects: domain [domain name] vs. ip domain name [domain name]
Below is some example output of what I am seeing on two different Cisco ASR 1006X WAN aggregation hub routers, running same firmware version.
$$$$$$$$$$$ BEGIN ROUTER 1 SAMPLE OUTPUT $$$$$$$$$$$$$$
Router1#show version
Cisco IOS XE Software, Version 16.09.02
Cisco IOS Software [Fuji], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.2, RELEASE SOFTWARE (fc4)
!
...
!
Router1#
Router1#sh run | inc domain
no ip domain lookup
ip domain name example.com
domain example.com
Router1#show domain all
*** DOMAIN NAME: example.com ***
Router1#
$$$$$$$$$$$$ END ROUTER 1 SAMPLE OUTPUT $$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$$ BEGIN ROUTER 2 SAMPLE OUTPUT $$$$$$$$$$$$$$
Router2#show version
Cisco IOS XE Software, Version 16.09.02
Cisco IOS Software [Fuji], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.2, RELEASE SOFTWARE (fc4)
!
...
!
Router2#
Router2#sh run | inc domain
ip domain name example.com
Router2#show domain all
Router2#
$$$$$$$$$$$$ END ROUTER 2 SAMPLE OUTPUT $$$$$$$$$$$$$$
Solved! Go to Solution.
03-22-2021 08:56 AM
As per your show output show that you using IOS XE Code.
based on that my comments :
Configures the fabric domain and enters fabric-auto-domain configuration mode. The no version of this command deletes the fabric domain.
domain { default| name name }
no domain
default |
Configures the default fabric domain and enters fabric-auto domain configuration mode. |
name name |
Configures a new fabric domain and enters fabric-auto domain configuration mode. |
Ip Domain Name : ( traditional domain config)
Defines a default domain name that the Cisco IOS software uses to complete unqualified host names (names without a dotted-decimal domain name).
03-22-2021 08:56 AM
As per your show output show that you using IOS XE Code.
based on that my comments :
Configures the fabric domain and enters fabric-auto-domain configuration mode. The no version of this command deletes the fabric domain.
domain { default| name name }
no domain
default |
Configures the default fabric domain and enters fabric-auto domain configuration mode. |
name name |
Configures a new fabric domain and enters fabric-auto domain configuration mode. |
Ip Domain Name : ( traditional domain config)
Defines a default domain name that the Cisco IOS software uses to complete unqualified host names (names without a dotted-decimal domain name).
03-22-2021 10:16 AM
Thank you, for whatever reason I was having difficulty finding the right command reference for those for the version that included the "domain" command referring to the fabric domain. Now I'm just doing a facepalm, but you answered my question, thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: