09-20-2019 08:39 AM
Good day,
Packet tracer is something new to me and this is my first task.
I cannot figure out why my DNS Server,FTP Server and Web Server only work with only 3 other Sys Admin Pc but not all other Pc in other network. My router seems to not pass data from the server network to other two network. Any idea how can i fix the issue?
I attached the pkt file for your reference.
Any help is greatly appreciated.
Solved! Go to Solution.
09-20-2019 12:59 PM
Hi @Mirul ,
The problem is in the addresses adopted by the PCs of networks B and C, since they adopted the same range of addresses as network A.
To correct this, you must create a DHCP pool for each network and assign a prefix range that corresponds to your network:
After this, the PCs adopt the corresponding ip range and the ping is successful
I attached the corrected exercise
Regards
09-20-2019 12:59 PM
Hi @Mirul ,
The problem is in the addresses adopted by the PCs of networks B and C, since they adopted the same range of addresses as network A.
To correct this, you must create a DHCP pool for each network and assign a prefix range that corresponds to your network:
After this, the PCs adopt the corresponding ip range and the ping is successful
I attached the corrected exercise
Regards
09-20-2019 07:25 PM
12-05-2023 08:03 AM - edited 12-05-2023 05:52 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide