cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2198
Views
5
Helpful
3
Replies

Router not sending information from server network to other network in Packet Tracer - Please Help

Mirul
Level 1
Level 1

Good day,

Packet tracer is something new to me and this is my first task. 

 

I cannot figure out why my DNS Server,FTP Server and Web Server only work with only 3 other Sys Admin Pc but not all other Pc in other network. My router seems to not pass data from the server network to other two network. Any idea how can i fix the issue?

 

I attached the pkt file for your reference. 

Any help is greatly appreciated.

!.PNG

1 Accepted Solution

Accepted Solutions

luis_cordova
VIP Alumni
VIP Alumni

Hi @Mirul ,

 

The problem is in the addresses adopted by the PCs of networks B and C, since they adopted the same range of addresses as network A.

Captura de Pantalla 2019-09-20 a la(s) 16.50.56.png

To correct this, you must create a DHCP pool for each network and assign a prefix range that corresponds to your network:

Captura de Pantalla 2019-09-20 a la(s) 16.54.44.png

After this, the PCs adopt the corresponding ip range and the ping is successful

I attached the corrected exercise

 

Regards

View solution in original post

3 Replies 3

luis_cordova
VIP Alumni
VIP Alumni

Hi @Mirul ,

 

The problem is in the addresses adopted by the PCs of networks B and C, since they adopted the same range of addresses as network A.

Captura de Pantalla 2019-09-20 a la(s) 16.50.56.png

To correct this, you must create a DHCP pool for each network and assign a prefix range that corresponds to your network:

Captura de Pantalla 2019-09-20 a la(s) 16.54.44.png

After this, the PCs adopt the corresponding ip range and the ping is successful

I attached the corrected exercise

 

Regards

Hey @luis_cordova ,
Thanks for your time looking into the problem.

Review Cisco Networking for a $25 gift card