12-06-2011 05:13 AM - edited 03-04-2019 02:32 PM
Hi,
I have some confusion about some hardware components. I watched the video datasheet of cisco routers and switches.
In cisco 2901 and 2911 models of routers there is service module . What is meant by service module. what does it do ?
If we buy a new 6500 switch, what are the components we get bydefault. Is there any special configuraton to be done for 6500 . like Sup engine config etc. What is the difference between ASIC and Sup engine ?
In which slots, we need to insert Supervisor Engine ? does it vary with the model . (6503, 6505, 6509, 6513 etc).
Please explain.
Thanks,
Ajay
12-06-2011 06:29 AM
What is meant by service module. what does it do ?
In general it is an add on hardware to the routers to provide support for additional services like -Terminating your T1/T3 links, Voice ports etc (in the case of 29xx). Check the below link to get more idea.
Different hardware supports different kind of service modules.
If we buy a new 6500 switch, what are the components we get bydefault.
If I remember correct - Chassis+Power supply. The supervisor and modules modules you need to order based on your requirement/budget.
In which slots, we need to insert Supervisor Engine ?
Depends on Sup. check the below link.
hth
MS
02-28-2012 12:38 AM
Thank you,
How many Sup engines we can use maximum on a switch ? Can we use more than 2?
Regards,
Ajay
02-28-2012 02:44 AM
How many Sup engines we can use maximum on a switch ? Can we use more than 2?
Maximum is 2. And WHY would you want to use more than 2? It doesn't make any sense.
That would be like flying a Piper Cherokee with a pilot, a co-pilot and a flight attendant.
08-29-2012 02:48 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
That would be like flying a Piper Cherokee with a pilot, a co-pilot and a flight attendant.
Laugh - well in a Piper Cherokee there can be a reason. Suppose two of the flight crew are trying to qualify for the MHC, someone needs to fly the plane (as many smaller Piper Cherokees don't have auto pilots).
You're right about the limitation of 2 sups in a 6500 but some large chassis designs can use more than 2 sups or processing engines to increase forwarding performance.
08-28-2012 06:02 AM
Thanks,
Can we call service modules as Daughter cards. like WIC cards in routers.
08-28-2012 03:49 PM
Can we call service modules as Daughter cards.
No. Daughter card is like an "add-on" card for a line card.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide