06-20-2005 04:23 AM - edited 03-03-2019 09:50 AM
Hello
I have installed v.35 card (PA-8T-V35) with octal cable. The problem is this that i cannot see 'show controller' information for serial ports. 'show contrller' support only this:
Router#show controllers ?
E1 E1 controller internal state
T1 T1 controller internal state
XTagATM Extended Tag ATM interface
cwan Show Catalyst WAN card related information
pos POS framer state
srp SRP controller information
| Output modifiers
<cr>
please help.
regards
-junaid
06-24-2005 03:04 PM
To the best of my knowledge, I does not heard about your peoblem, I think it seems to be a hardware issue. It may be on serila ports that may not seat properly or the hardware may not work properly.
Try by restart the router, it sometime may work.
06-25-2005 01:58 AM
Is your router seeing the hardware?
You should see it listed if you do a show version.
06-25-2005 09:53 AM
First, do a "show diag".. you should see something like this:
Router# show diag
(display text omitted)
Slot 8: Logical_index 17
Board is analyzed ipc ready FlexWAN controller
Slot database information:
Flags: 0x2004 Insertion time: unknown
CWAN Controller Memory Size: Unknown
PA Bay 1 Information:
Mx Serial PA, 8 ports
EEPROM format version 0
HW rev 0.00, Board revision UNKNOWN
Serial number: 00000000 Part number: 00-0000-00
Here you see the PA-8T-V35 is installed ("PA Bay 1 Information: Mx Serial PA, 8 ports")
What do you get with a "show controllers cwan"?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide