Hey!
LAB: OSPF over multipoint frame relay (hub and 2 spokers).
Neighbors are not coming up.
Wireshark capture is showing 1-1 hello packets to 192.168.0.66 and to 192.168.0.67 but that's all.
Neighbor command is not shown in the sh run, and the prioriti is 0.
R1
interface Loopback0
ip address 1.1.1.1 255.255.255.0
interface Serial0/0.1 multipoint
ip address 192.168.0.65 255.255.255.192
ip ospf priority 0
frame-relay map ip 192.168.0.66 102 broadcast
frame-relay map ip 192.168.0.67 103 broadcast
router ospf 1
router-id 1.1.1.1
log-adjacency-changes
network 1.1.1.0 0.0.0.0 area 0
network 192.168.0.64 0.0.0.63 area 0
FR map is active
Neighbor ID Pri State Dead Time Address Interface
N/A 0 ATTEMPT/DROTHER 00:01:21 192.168.0.66 Serial0/0.1
N/A 0 ATTEMPT/DROTHER 00:01:21 192.168.0.67 Serial0/0.1
Serial0/0.1 is up, line protocol is up
Internet Address 192.168.0.65/26, Area 0
Process ID 1, Router ID 1.1.1.1, Network Type NON_BROADCAST, Cost: 64
Transmit Delay is 1 sec, State DROTHER, Priority 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:00
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
R2
interface Loopback0
ip address 2.2.2.2 255.255.255.0
interface Serial0/0.1 multipoint
ip address 192.168.0.66 255.255.255.192
ip ospf priority 0
frame-relay map ip 192.168.0.65 201 broadcast
frame-relay map ip 192.168.0.67 201 broadcast
router ospf 1
router-id 2.2.2.2
log-adjacency-changes
network 2.2.2.0 0.0.0.0 area 0
network 192.168.0.64 0.0.0.63 area 0
Neighbor ID Pri State Dead Time Address Interface
1.1.1.1 0 INIT/DROTHER 00:01:39 192.168.0.65 Serial0/0.1
Serial0/0.1 is up, line protocol is up
Internet Address 192.168.0.66/26, Area 0
Process ID 1, Router ID 2.2.2.2, Network Type NON_BROADCAST, Cost: 64
Transmit Delay is 1 sec, State DROTHER, Priority 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:19
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
R3
interface Loopback0
ip address 3.3.3.3 255.255.255.0
interface Serial0/0.1 multipoint
ip address 192.168.0.67 255.255.255.192
ip ospf priority 0
frame-relay map ip 192.168.0.65 301 broadcast
frame-relay map ip 192.168.0.67 301 broadcast
router ospf 1
router-id 3.3.3.3
log-adjacency-changes
network 3.3.3.0 0.0.0.0 area 0
network 192.168.0.64 0.0.0.63 area 0
Neighbor ID Pri State Dead Time Address Interface
1.1.1.1 0 INIT/DROTHER 00:00:30 192.168.0.65 Serial0/0.1
Serial0/0.1 is up, line protocol is up
Internet Address 192.168.0.67/26, Area 0
Process ID 1, Router ID 3.3.3.3, Network Type NON_BROADCAST, Cost: 64
Transmit Delay is 1 sec, State DROTHER, Priority 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:16
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Thanks!
