Software download error on CSR 1000v
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-24-2022 09:46 PM
Hi,
I was trying to download the new software to our CSR 1000v router using TFTP.
But below error message showed.
I tried to download the same file on the different router and it was able to download.
It seems CSR 1000v has the issue.
Any idea about this?
Loading csr1000v-universalk9.17.03.04a.SPA.bin from 10.165.114.27 (via GigabitEthernet1): !
%Error opening bootflash:/csr1000v-universalk9.17.03.04a.SPA.bin (Permission denied)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-24-2022 11:31 PM
- Could you execute the command dir bootflash:
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-24-2022 11:33 PM
Yes,
I am able to execute the command as below.
RTR05#dir bootflash:
Directory of bootflash:/
No files in directory
7835619328 bytes total (3987382272 bytes free)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-25-2022 12:00 AM
- The original error could be confusing and or indicating a problem with permissions on the source tftp server , albeit counter intuitive. Check the TFTP server's logs when this is tried (and or verify if the file can be successfully accesses on the tftp-server) . Also check if you can download this file onto something else then the csr1000v through a TFTP-transfer (to verify this possibility).
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-25-2022 09:36 PM
Hi,
I see the software is downloadable when tried with another router.
So TFTP service is no issue.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-25-2022 11:26 PM
- Issue the command show logging on the csrv1000 after the attempted tftp transfer, find out if the logs can provide additional info's.
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-26-2022 07:19 PM
hi,
can you ping the TFTP IP address from the CSR1K having problem?
is the CSR1K using a VRF on its managment interface (our source interface)?
can you alternatively use FTP?
