cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr
1229
Views
0
Helpful
3
Replies
Highlighted
Beginner

%SPA_OIR-3-UNSUPPORTED 7609-S SIP-400

We installed a SPA 4XT3/E3 Copper DS3 Module into our Cisco 7609 SIP-400 Module and got these errors:

SPA-INSCARD: Card inserted in Subslot 2
SPA-UNSUPPORTED: The SPA-4XT3/E3 in 4/2 is unsupported by the SIP-400
 
SPA-INSCARD: Card inserted in Subslot 3
SPA-UNSUPPORTED: The SPA-4XT3/E3 in 4/3 is unsupported by the SIP-400

=====================================================================
Module        Model                Operational Status
=====================================================================
subslot 4/2   SPA-4XT3/E3          out of service(not allowed online)
---------------------------------------------------------------------
subslot 4/3   SPA-4XT3/E3          out of service(not allowed online)
=====================================================================
 
=====================================================================
                          H/W   Field Programmable  Current  Minimum
Slot Card Type             Ver.  Device: "ID-Name"   Version  Version
=====================================================================
4/2 SPA-4XT3/E3 <DISABLED> 0.655 ????????????        ?.?      ?.?
---------------------------------------------------------------------
4/3 SPA-4XT3/E3 <DISABLED> 0.655 ????????????        ?.?      ?.?
=====================================================================

We reloaded the SPA and SIP cards with no luck.

A text document of the sh log, sh module, and show monitor event-trace spa latest are attached.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Hall of Fame Expert

%SPA_OIR-3-UNSUPPORTED 7609-S SIP-400

Hello Dennis,

it should be supported as reported here

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76intsw.html#wp1144362

table 2-5

from your log files I see you are running 12.2(33)SRB2 I would suggest if possible to test with another IOS image like SRE series

Hope to help

Giuseppe

View solution in original post

Highlighted
Cisco Employee

%SPA_OIR-3-UNSUPPORTED 7609-S SIP-400

This spa is not supported in the sip-400 until SRC.

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1036097

You will need to run SRC or higher for this combination to work

Regards

David Aicher

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Expert

%SPA_OIR-3-UNSUPPORTED 7609-S SIP-400

Hello Dennis,

it should be supported as reported here

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76intsw.html#wp1144362

table 2-5

from your log files I see you are running 12.2(33)SRB2 I would suggest if possible to test with another IOS image like SRE series

Hope to help

Giuseppe

View solution in original post

Highlighted
Cisco Employee

%SPA_OIR-3-UNSUPPORTED 7609-S SIP-400

This spa is not supported in the sip-400 until SRC.

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1036097

You will need to run SRC or higher for this combination to work

Regards

David Aicher

View solution in original post

Highlighted
Beginner

%SPA_OIR-3-UNSUPPORTED 7609-S SIP-400

Thanks guys!

We actually were talking to our Cisco sales rep and was told that this was compatible, until we inserted it into the SIP module. The logs definately tell the story. We are looking at upgrading our IOS after we confirm and close this ticket with TAC.

I'm glad I posted here. Very helpful!!!