06-01-2023 10:56 PM - last edited on 06-02-2023 02:56 AM by Translator
I use static routes. but when I add ip route on the router it is not saved. when I do
"ip show route"
it doesn't show the IP route that I gave before. but in the config routing interface, there is the ip route that I added earlier
Please help me. Am I wrong in doing the ip calculation on the ip route that I wrote?
VLSM Table
IP Configuration
Solved! Go to Solution.
06-01-2023 11:19 PM - last edited on 06-02-2023 02:58 AM by Translator
@airlux dsaasd hi, issue is your next hop is not reachable. (10.44.8.121). correct gateway need to be 10.44.8.113. and according to the topology details, you entered wrong IPs to wrong interfaces in Router0.
Fa6/0 should be 10.44.8.113
fa1/0 should be 10.44.8.121
fa 0/0 need to be 10.44.8.117
06-01-2023 11:19 PM - last edited on 06-02-2023 02:58 AM by Translator
@airlux dsaasd hi, issue is your next hop is not reachable. (10.44.8.121). correct gateway need to be 10.44.8.113. and according to the topology details, you entered wrong IPs to wrong interfaces in Router0.
Fa6/0 should be 10.44.8.113
fa1/0 should be 10.44.8.121
fa 0/0 need to be 10.44.8.117
06-01-2023 11:39 PM - edited 06-01-2023 11:41 PM
I have changed the ip on router 0. but the result is still the same when I have added the ip route it has no effect at all. is there an error in the destination/next hop I have?
06-02-2023 12:08 AM
Sorry, I forgot to change the gateway/next hop on the static route. after I changed it normally runs now. Thank you very much for your help Kasun Bandara.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide