04-21-2018 02:14 AM - edited 03-05-2019 10:18 AM
hi all, i had set two users in cisco 3850 and 3650 -i switch. one is admin with privilege 15 and another is user with privilege 7.
but when we login from admin user it is not asking for enable password, it directly goes to privilege exc mode. i have set enable secret level 15 but its can' t work. so pleas guide me how set enable password for user who has privilege 15.
04-21-2018 02:26 AM
Hi,
Share your Line VTY configuration.
Regards,
Deepak Kumar
04-21-2018 03:03 AM - edited 04-21-2018 03:05 AM
mr deepak
username user password 7 106
username Admin privilege 15 password 7 0123565B4846
ine con 0
login local
stopbits 1
line aux 0
stopbits 1
line vty 0 4
login local
transport input ssh
line vty 5 15
login
04-21-2018 03:35 AM
Hi,
This is becuase " Level 15 is the level of access permitted by theenable password."
Regards,
Deepak Kumar
04-21-2018 03:38 AM
sir, how i can set enable password for that.
how to stop admin to goes directly to privilege exec.
04-21-2018 06:36 AM
Hi,
Try with below configuration.
aaa new-model
!
!
aaa authentication login default group radius local
!
line vty 0 4
no login local
login authentication default
!
!
try this command along with your username and password.
Regards,
Deepak Kumar
04-23-2018 05:07 AM
04-24-2018 06:19 AM
Hello!
Can you try using this commands?
S(config)#line vty 0 15
S(config-line)#login local
S(config-line)#priviledge level 0
Best Regards,
04-24-2018 08:36 PM
04-24-2018 10:12 PM
Hi,
I tested in my lab and it is working. Please share "Show Version" and full running configuration of the router.
Regards,
Deepak Kumar
04-24-2018 10:35 PM
04-25-2018 02:28 AM - edited 04-25-2018 02:29 AM
It is what "Deepak" said. The enable mode gives you right to "level 15". If you try logging in the EXEC mode and check level; you will see "7 or 15" (depending on the credential you use)!!
Cheers
04-25-2018 02:40 AM
hey mr. rajesh;
i think you din't get my question. please read this again. if you din't get this, tell me, i am try it an easy language. then please reply helpful suggestion. thank you.
04-25-2018 02:42 AM
Sorry Manish. May be I misunderstood what you are asking.
04-25-2018 02:41 AM
hey Mr. rajesh;
i think you didn't get my question. please read this again. if you didn't get this, tell me, i am try it an easy language. then please reply helpful suggestion. thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide