08-13-2020 12:02 PM
hi,
I am going to upgrade my CSR1000v. and I have done this many times before. but I just found a link below.
All I did before was simply copy the new .bin file to my CSR then change the "boot system" to the new version, then reboot the CSR. Do I have to do the steps from above link, such as "config-register", and "load from GRUB Mode"? are there any problem if I am just change the "boot system"?
Thanks,
Ryan
Solved! Go to Solution.
08-13-2020 01:23 PM - edited 08-13-2020 01:24 PM
i do not see any difference, you can use both the mode as per document.
do you any special concern or which stop you to upgrade please let us know.
08-13-2020 01:23 PM - edited 08-13-2020 01:24 PM
i do not see any difference, you can use both the mode as per document.
do you any special concern or which stop you to upgrade please let us know.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide