10-28-2019 02:50 PM
I have switches with routing enabled on them, on 1 them several vlans and svi 100, 200, 300, 700. When i am doing ping 8.8.8.8 from source vl100 i get response, when i do ping with no source no response. Ip route shows default route goes via vl700 , so I assume ping uses vl700 interface as source by default, correct?
How can i fix this so I'd be able to ping 8.8.8.8 from default , without source vlan? No ACLs exist.
Solved! Go to Solution.
10-29-2019 07:24 AM
Thank you guys for responses. I found a way with ip default-gateway XXXX command and using ip of that necessary vlan 100 which is able to reach internet, and ip http client source vlan 100 , that i needed to activate smart licenses.
10-28-2019 02:56 PM
Hello,
the device that does the NAT translation needs to know of all networks that need to be translated. Which device is doing the NAT ?
10-28-2019 03:02 PM
looks like i figure it out,
so vlan 100 ip subnet is reachable from other parts of the LAN , while vl700 is not. SO I am just not getting response back. Am I right?
10-28-2019 03:45 PM
Hello
@Bekzod Fakhriddinov wrote:
looks like i figure it out,
so vlan 100 ip subnet is reachable from other parts of the LAN , while vl700 is not. SO I am just not getting response back. Am I right?
Possibly could part of your problem by which vl700 traffic is being denied however as it was stated by @Georg Pauwen this vlan 700 also needs to be network translated if it runs on a non public routed subnet, And if it does you would probably have another networking device such a router performing this network translation.
10-28-2019 03:40 PM
10-29-2019 07:24 AM
Thank you guys for responses. I found a way with ip default-gateway XXXX command and using ip of that necessary vlan 100 which is able to reach internet, and ip http client source vlan 100 , that i needed to activate smart licenses.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide