Vlan,Vtp,VLSM about installation inform

[Sefa On]

     hello dear all,

i am writing from Istanbul, i am rellay need to your help, my mind so mixed right now. i have projecet network inst.

we have this equpmints

1.Asa 5505

1.3750

2 2960 switchs

i want to subnetting on this projecet you can details on following

I have 1 netwok range from 10.1.1.0 to 10.1.1.255 but 4 other subnet

10.1.1.0 / 27 ( for network device, switch, firewall, wi-fi and etc. )

10.1.1.32 / 27 ( for server, storage and etc. )

10.1.1.64 /26 ( for IPT ip phone )

10.1.1.128 /25 ( for clinet, printer, 3party and etc. )

what can i do ? how should i do conf on my device ? i can't run that procejt this configuration you can see the attectment on configuration file.

please help me about them.

i am waiting a good news.

best wishes from istanbul

[Majed Saeed]

Hi Sefa ,

Please clarify more what do you mean by :

what can i do ? how should i do conf on my device ? i can't run that procejt this configuration you can see the attectment on configuration file.

It is an easy setup as you proposed in the attachment . Moreover need to configure routing for the VLANs to be communicated with each other .

Regards ,

[Sefa On]

thanks a lot for your feedback Majed,

so how i can confugure routing for the vlans on 3750 ? or which one commens ? i am so sorry about them,

i am a new stundent on cisco its means i dont have any idea about them, then i have a new job and new project, i need to fihinish work.

can you help me about this conf ?

[Syed Aman Hussain]

Dear Sefa,

i found your attached file for Diagram,its simply good,

do the Nat/PAT configuration in Firewall, with WAN IP address

assign one vlan for management , 10.0.2.0 /24

like for fireall inside, : 10.0.2.1

for Core                  :  10.0.2.2

for all A/switches     :   10.0.2.3

create vlan designs as per switches/ building /services then

VLAN Design like:

vlan 10 management

vlan 11 for Wireless

vlan 12 server

vlan 13 voice

like this

your designing part

now come to configuration

Firewall

configure the firewall with the NAT/PAT service for WAN

then configure the ACL for filtering traffic in Firewall

Core Switch

configure the VLAN  L3 in Core switch

then Configure the default route to Firewall

A/Switch

After configuring basic configuration

configure the default route to Core Switch

Rate it,

[Majed Saeed]

Hi Sefa ,

This is depend of the routing protocol used between FW-LAN and between FW-WAN . If we suppose that FW faced interface has an OSPF then you should configure and OSPF too in your 3750 switch ..

R,

Majed

[Sefa On]

hello dear all,

really thanks a lot for your feedback and cooperation, but still its not working diffirent subnet right now they cannt see themselves hows entery commend on cisco3750 for routing then can i entery 3750's default-gateway  on 2960.

thats so mixed, i dont understand why doesnt working ? i need to fihinish work of tomm orrow.

do you have any e.g commends route or same projecet ?

best wishes

[Syed Aman Hussain]

Dear Sefa,

its must work just copy the running files and send ,

[Sefa On]

hello dear hussain,

السلام عليكم

i have packet tracer fie if you want, i can sent to you, you can more details conf...

still it doenst work. i am waiting your check.. you can see all details on attechment file.

thanks a lot bro... 

[Syed Aman Hussain]

try to attached it its unable to download,

[Sefa On]

so sorry that, i did it...b

[Sefa On]

hello dear all,

i wish you a nice week, and happy monday,

do you have anything about them, please somebody help me...