VWIC2-2MFT-T1/E1 work with 2951?

[Patrick McHenry]

I'm just double checking here because I saw one doc that didn't mention the 2900 on the data sheet but, I ve seen the 2900 listed with on others. I don't see the 2900s listed in this with the interface.

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html

[paolo bevilacqua]

Yes, it does.

[Patrick McHenry]

Raised another question. Could this interface be used for only data as well? I noticed that the interface name has voice in it. Can it be used for data only or voice only?

Thanks, Pat.

[paolo bevilacqua · Accepted solution]

It can be used for either, in fact it is called Voice Wan Interface Card.

Thank you for the nice rating and good luck!

[tsolution]

Yes it works fine I tested personally.

Sent from Cisco Technical Support iPhone App

[Alessio Andreoli]

Yes, it does.

On production environment at the moment. check the minimum IOS version you need!!!

Alessio

[paolo bevilacqua]

Alessio Andreoli wrote:
 Yes, it does.
On production environment at the moment. check the minimum IOS version you need!!!

There is no minimum IOS version for VWIC2 support on ISR G2.