Working with WS-X2961-XL

[jlixfeld]

I've got a requirement to use a WS-X2961-XL in a 2924M-XL to pull a PVC off of an ATM network and drop it off on an ethernet port.

The WS-X2961-XL was discontinued long ago and I haven't been able to find much documentation on how to configure this thing. Anyone have any sample configs?

[b.speltz]

When the ATM interface is flooded with BPDU's which are generated using a packet generator at a rate greater than 3% of the line rate, the 2900 will go into a stuck mode.For more information verifiy the following URL:

http://www.cisco.com/en/US/products/hw/switches/ps607/products_installation_guide_chapter09186a008007f176.html