cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
256
Views
0
Helpful
1
Replies

SDWAN QoS

apfeil
Level 1
Level 1

EPLAN circuit has 30 different endpoints.
Some have 10G, some have 1G, some have even less.

Is it possible to:

shape traffic from a 10G circuit towards a site with a 1G circuit to 1Gpbs

shape traffic from a 10G circuit towards a site with 10G circuit to 10Gbps

shape traffic from a 10G circuit towards a site with 300Mbps to 300Mpbs.

Thanks,

Alex

1 Reply 1

Hi,

per-tunnel QoS can do it:

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/qos/ios-xe-17/qos-book-xe/per-tunnel-qos.html

Supported only in hub&spoke topology, and this is not "per site", but "per tunnel". If remote sites (spokes) have only one transport, so you can assume it as per site as well

 

 

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.