cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
777
Views
15
Helpful
2
Replies

7009 vPC to 2348TQ ESXI 6.7 losing pings

kpasa004
Level 1
Level 1

Hi,

I currently have two 2348TQ's connected in a vPC to two 7009's in a vPC running 7.2(2)D1(2) via four F312FQ-25's (two connections per 7009). I am running into an issue with some Dell 720's with Intel 520X NIC's connecting to the 2348's. We have installed the latest drivers for the NIC's on the servers. Once they are connected they will ping three times and drop off. If I wait about 30 minutes they will ping 3 times and drop off again. I have connected a laptop to the 2348's and verified pings to the laptop with no issues. The Dell servers have ESXI 6.7 installed.

 

Any Advice?

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

This is looks more like Vmware vSwitch config  or Dell network card driver issue as per your description.

 

check once again  FEX port-negotiation settings. before you open a case with VMWARE or DELL.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

David Castro F.
Spotlight
Spotlight

Hello Kpasa,

 

This kind of issues usually happen due to a "received missed errors" after applying drivers or missing new drivers and I have seen many cases now in different ESXi versions. Below I will share a link where there is a couple of tests you could to verify what might be the problem:

https://www.dell.com/community/PowerEdge-Hardware-General/R420-nic-speed-for-Intel-ethernet-10G-x520-adapters/td-p/3998796

 

You could use a command like the following with the vnic with the problems to verify the counters and discard whether or not it has something to do with it:

 #  esxcli network nic stats get -n vmnic2

 

Below I will also share a couple of bugs for servers that have this Intel NIC 10G, where they have found ways to disable and enable features to reproduce them and also waiting for a solution:

https://sourceforge.net/p/e1000/bugs/383/

https://sourceforge.net/p/e1000/bugs/394/

http://forums.qlogic.com/SupportCenter/articles/Question_Answers/2756?retURL=%2FSupportCenter%2Fapex%2FCustomer_Support_main&popup=true

 

Keep me posted,

 

Please qualify the helpful answers!

 

Thanks,

 

David Castro, 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: