Adding N2K to existing infrastructure

[S891]

Hi,

I have to add a pair of N2Ks to Existing N5Ks. There is already a pair of N2Ks attached to N5Ks. 

What are the steps required to perform this task ? Also, can I combine FETs with SFPs for N2K connection on a single switch. 

Do I need any downtime for the already connected N2K and N5K or any service disruption during this activity?

Thanks

[Reza Sharifi]

Hi,

What are the steps required to perform this task ? Rack the 2ks and run the cables to 5ks and plug in the SFP+s or FETs on both sides. If the link comes up create your VPC config and than do a "sh fex" if all configured correctly you should see the new FEXs online.

can I combine FETs with SFPs for N2K connection on a single switch. 

No, use FETs or 10Gig SFP+.  Every 2k comes 4 FETs in the box so that should be enough to connect the FEX to both 5ks using 10Gigs.

Do I need any downtime for the already connected N2K and N5K or any service disruption during this activity?

No, no need for any downtime. Your old FEXs should be untouched.

HTH

[S891]

Thank you Reza.

[Reza Sharifi]

Can you mark the post as answered, so others can benefit from it?

Thanks,