01-27-2021 04:02 PM
We have a C240 M5 with a VIC 1457. We want to use this as a standalone server connected to a 9300 switch with 2 x 10g network ports. how in the world do you configure the VIC card ports in access mode?
i've removed the default port channel option and changed the vnic settings in CIMC.
right now the only way to get any network connection is to use it in port in trunk mode and set a native vlan on the switch.
anyone else get this working in access mode? is this documented somewhere? I really don't want to this to break on the next upgrade
thanks
Gd
Solved! Go to Solution.
01-28-2021 05:56 AM
i see a similar thread here:
https://community.cisco.com/t5/server-networking/help-with-cisco-ucs-c220-m5l-with-vic-1457-vmware-questions/m-p/4261184
with this article
as guidance.
01-28-2021 05:56 AM
i see a similar thread here:
https://community.cisco.com/t5/server-networking/help-with-cisco-ucs-c220-m5l-with-vic-1457-vmware-questions/m-p/4261184
with this article
as guidance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide