very randomly we get WLANs with data path down to our DMZ Anchors. the fix is to clear the connection on the ASA (clear conn address ) do other people see this? i've seen this in the forums for years, is there a ASA fix for this?
We have a C240 M5 with a VIC 1457. We want to use this as a standalone server connected to a 9300 switch with 2 x 10g network ports. how in the world do you configure the VIC card ports in access mode? i've removed the default port channel option and...
i'm a smart account admin, but i dont seem to have access to the smart call home portal, it says unregistered customer. i have a tac ticket open, but not sure they follow. anything special to register my user account ?
from what i can see, it looks like the reports are mainly based around vulnerabilities. but is there a report for the recommended version even if there is not a security vulnerability? i just want the 'starred' version of the software for all the dev...
i see a similar thread here: https://community.cisco.com/t5/server-networking/help-with-cisco-ucs-c220-m5l-with-vic-1457-vmware-questions/m-p/4261184 with this article https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c-series...
sent you the case number. it looks like the first device registration took a few hours to update the portal. I now see device management and a bunch of pending devices. also looks like each device can take up to 15 mins to register. I still have dev...
ive asked that my case move to the smart call home team. i got the one device registered, so my status is now customer admin. however i still cant see anything under registration management. it also says my device is not under contract from the emai...
this is not on the device side, this is on the portal side (https://tools.cisco.com/sch). from the overview page i see:Logged in User : myCCOID Role : Unregistered Customer on the registration management page i see: Access DeniedYour current role do...
