06-24-2004 01:06 AM
Hi,
When configuring DLSW for ER using the global commands (transparent switch-support) and the interface commands (mac-address, transparent redundancy-enable and transparent map)
are the traditional DLSW ethernet commands (dlsw bridge-group) still necessary or not ?
If not why ? Does the ER implicit contains this commands ?
Thnx
Omar
Solved! Go to Solution.
06-24-2004 05:00 AM
No, the traditional bridge commands are not applicable. In fact, once you enable DLSW ER, you will not be able to enable the traditional bridge-group commands. The ER takes care of receiving the packets into the DLSW process.
06-24-2004 05:00 AM
No, the traditional bridge commands are not applicable. In fact, once you enable DLSW ER, you will not be able to enable the traditional bridge-group commands. The ER takes care of receiving the packets into the DLSW process.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide