05-23-2002 10:15 PM
Is 1000Base-T GBIC Supported in Catalyst 6006 now? If so, what is the hardware/software environment it needs (i.e.1000Base-T GBIC Card type and the CatOS or IOS version)?
05-30-2002 01:40 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
06-20-2002 06:45 AM
Software release 7.2 provides initial support for these modules and chassis:
1000BASE-TX (copper) GBIC (WS-G5483)
CWDM-GBIC-1470(=)
CWDM-GBIC-1490(=)
CWDM-GBIC-1510(=)
CWDM-GBIC-1530(=)
CWDM-GBIC-1550(=)
CWDM-GBIC-1570(=)
CWDM-GBIC-1590(=)
CWDM-GBIC-1610(=)
Cisco 7606 Internet Router (6 slots)
32-MB and 48-MB Flash PC cards
So I assume you need 7.2.x if you want to use the 1000BaseT GBIC (WS-G5483)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide