cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2162
Views
0
Helpful
1
Replies

LACP on FEX Ports

visitor68
Level 4
Level 4

Does the 22xx Series FEX support static or dynamic LAGs between itself and a server?

Imagine a server with dual 10G NICs, and I need to connect them to the SAME 22xx  FEX....can I set up a LAG between the two 10G NIC ports and two 22xx  FEX Host ports? Does it depend on how the FEX is connected to the parent  55xx?

Drawing1.jpg

1 Accepted Solution

Accepted Solutions

sachinraja
Level 9
Level 9

LACP will work if the server is connected to the same FEX... but you arent getting the advantage of dual homing and failover. If this FEX fails, then the server connectivity is lost.. If you have another 2232 top of the rack , connect the 2nd nic to that and you can do a VPC between the ports to have full redundancy.

Hope this helps.

View solution in original post

1 Reply 1

sachinraja
Level 9
Level 9

LACP will work if the server is connected to the same FEX... but you arent getting the advantage of dual homing and failover. If this FEX fails, then the server connectivity is lost.. If you have another 2232 top of the rack , connect the 2nd nic to that and you can do a VPC between the ports to have full redundancy.

Hope this helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: