08-27-2012 02:51 AM
Hello , in order to prepar spare parts , i list the needed parts requested for a particular network devices list .
With Nexus N5K-C5548UP-FA , a module N55-DL2 is present on the device , but i do not find any part reference on the CCO .
After some seach i found only the layer3 module is are labeled with a PID and the lyer2 ( n55-dl2) is not labelled .
So as the L3 module is plugged by removing the l2 module , does that means the l2 module is the default module ? and is delivered with the chassis by default ?
Is someone can confirm ?
Rgds.
Hubert.
Solved! Go to Solution.
08-27-2012 06:21 AM
Hello Hubert..
You are correct.. N55-DL2 is default module unless you have a L3 module
Thanks
-Prashanth
08-27-2012 06:21 AM
Hello Hubert..
You are correct.. N55-DL2 is default module unless you have a L3 module
Thanks
-Prashanth
08-27-2012 07:08 AM
Hi Prashanth , than you very much for your clarification . Have a nice day .
Rgds.
Hubert.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide