Nexus1000v Basic Network Configucation

[mhiyoshi]

Dear all,

I have just installed the Nexus1000v Virtual host on VMware ESXi UCS Server.

However I think the basic configuration is totally different from other real Nexus devices such as Nexus5/7/9K.

So I appreciate if you can let me know the following questions.

1. How to configure the connection between Virtual NICs (access/trunk)

2. How to configure the connection between Virtual NIC and Real NIC (access/trunk)

3. Inter-VLAN Routing between 2 VLAN such as VLAN10 and VLAN20.

4. L3 Static Routing except default route to Virtual/Real NIC devices.

Any sample configuration is very helpful. thank you.

Best Regards,

Masanobu Hiyoshi 

[Kirk J]

Please see https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_4/install/guide/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314a_chapter_01.html which has some sample configs.

N1k switch is a L2 switch, so there is no L3 related configuration.

Thanks,

Kirk...

[sbhadrav@cisco.com]

Please check the above link provide complete stucture:-
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Aug2013/CVD-VirtualizationWithCiscoUCSNexus1000VandVMwareDesignGuide-AUG13.pdf