05-01-2018 08:53 AM - edited 03-01-2019 01:44 PM
Dear all,
I have just installed the Nexus1000v Virtual host on VMware ESXi UCS Server.
However I think the basic configuration is totally different from other real Nexus devices such as Nexus5/7/9K.
So I appreciate if you can let me know the following questions.
1. How to configure the connection between Virtual NICs (access/trunk)
2. How to configure the connection between Virtual NIC and Real NIC (access/trunk)
3. Inter-VLAN Routing between 2 VLAN such as VLAN10 and VLAN20.
4. L3 Static Routing except default route to Virtual/Real NIC devices.
Any sample configuration is very helpful. thank you.
Best Regards,
Masanobu Hiyoshi
05-01-2018 11:32 AM - edited 05-01-2018 06:01 PM
Please see https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_4/install/guide/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314a_chapter_01.html which has some sample configs.
N1k switch is a L2 switch, so there is no L3 related configuration.
Thanks,
Kirk...
05-22-2018 07:08 PM
Please check the above link provide complete stucture:-
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Aug2013/CVD-VirtualizationWithCiscoUCSNexus1000VandVMwareDesignGuide-AUG13.pdf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide